Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds - Beko WTE7512BO User Manual

C
INFORMATION
• If a second auxiliary function conflicting
with the first one is selected before starting
the machine, the function selected first
will be canceled and the second auxiliary
function selection will remain active.
• An auxiliary function that is not compatible
with the programme cannot be selected.
(See, "Programme and consumption table")
• Auxiliary Function buttons may vary
according to the model of the machine.
4.3.10.1 Auxiliary functions
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.
C
INFORMATION
• Prewash without detergent is
recommended for tulle and curtains.
• Fast+
When this function is selected, the durations of
the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
• Pet Hair Removal
This function helps to remove pet hair that
remain on your garments more effectively.
When you select this function, Prewash and
Extra Rinse steps are added to the normal
programme. Thus, washing is performed with
more water and the pet hair is removed more
effectively.
16 / EN
4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds
• Drum Cleaning
Press and hold the auxiliary function button 1
for 3 seconds to select the programme.
Use regularly (once in every 1-2 months)
to clean the drum and provide the required
hygiene. Operate the programme while the
machine is completely empty. To obtain
better results, put powder lime-scale remover
for washing machines into the detergent
compartment no. "2". When the programme
is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme.
It is a maintenance programme.
• Do not run the programme when there
is something in the machine. If you try to
do so, the machine detects that there is
load inside and aborts the programme.
• Child lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary functions.
• Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue running.
To activate the Child Lock:
2. Pres and hold the Auxiliary Function button
for 3 seconds. C03, C02, C01 will appear on
the display respectively while you keep the
button pressed for 3 seconds. Then, while
the light of the Auxiliary Function button 2
is flashing, "Con" will appear on the display
indicating that the child lock has been activated.
If you press any button or turn the Programme
Selection knob when the Child Lock is active,
same phrase will appear on the display.
Washing Machine / User's Manual