Dimplex EF2570G Owner's Manual page 8

Fireplace Installation
be required if, after installation,
the circuit breaker trips or fuse
blows on a regular basis when the
cassette is operating. Additional
appliances on the same circuit
may exceed the current rating of
the circuit breaker.
Figure 2
Wiring
8
MOTOR
Media Installation
1. Remove the two knobs in the
top corners (Figure 2).
2. Remove the front glass as-
sembly from the unit.
!
NOTE: There are two clips on
the bottom that hold the assembly
on the unit.
3. Carefully pour the media into
the media tray.
4. Reinstall the front glass as-
sembly, ensuring that the
clips are inserted into the
frame.
5. Install the fireplace into the
mantel (refer to mantel as-
sembly instructions).
FLAMES
THERMISTOR
REMOTE
SWITCHBOARD
DISPLAY
www.dimplex.com