11N Wireless Broadband Router User Guide
Port: Enter the controlled TCP/UDP protocol port.
You can specify a port or port range.
Type: Select one protocol (TCP/UDP/Both) from
the drop-down list.
Time: Select the time range of client filter.
Date: Select the day(s) to run the access policy.
Enable: To enable/disable the access policy
(forbid/permit the packets matched with the
access policy to pass through the router.
Example1 Forbid LAN computers at the IP addresses of
192.168.0.100--192.168.0.120 to access the Internet.
Example 2
of 192.168.0.145 to access websites during 8:00 to
Permit LAN computer with the IP address
59