‧
IP Multicast IGMP v1/v2
IP Management
‧
NAT (Network Address Translation)
‧
NAPT (Network Address and Port Translation)
‧
DHCP Server / Relay / Client (WAN Port)
‧
VPN (IP Sec, PPTP, L2TP) Pass-Through
‧
DNS Proxy
‧
Dynamic DNS,
‧
UPnP support
‧
Virtual Server (Port Forwarding) and DMZ host
Security
‧
PPP over PAP (Password Authentication Protocol; RFC1334)
‧
PPP over CHAP (Challenge Authentication Protocol; RFC1994)
‧
DoS Protection
‧
Stateful Packet inspection (SPI)
‧
Built-in NAT Firewall
‧
IP Based packet filtering
‧
Password Protected System Management
Web Based Management
‧
Web-based GUI Configuration / Management
‧
Command-line Interpreter (CLI) via serial interpreter or Telnet over Ethernet
‧
Telnet Remote Management
‧
Firmware upgrade via FTP / TFTP
‧
Support SNMP
‧
Built-in Diagnostic tool
Interface
‧
One USB port compliant with USB v1.1, full speed (12Mbps)
‧
Four RJ45 ports compliant with IEEE 802.3/802.3u, 10/100Mbps auto
selection
‧
One RJ11 port for ADSL connection
‧
One reset button for restoration of factory default setting
‧
One Power ON/OFF switch
LED Indicators
‧
Power, WAN, ADSL, LAN X 4
Need help?
Do you have a question about the ENDSL-A2+4R2 and is the answer not in the manual?
Questions and answers