Advertisement
Quick Links
Advertisement
Related Manuals for BROSA Alya Wall Light
Summary of Contents for BROSA Alya Wall Light
- Page 1 Alya Wall Light A S S E M B LY G U I D E...
- Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 2 people. Assembling this product on It's always easier with a a soft surface protects its friend.
- Page 3 Safety MAX.25W 220-240V ~ 50Hz 1. For indoor use only. 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. 4.
- Page 4 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ① ② Light Body x 1 Shade x 1 Hardware Hardware...
-
Page 5: What You Need
Wall Fixings Because of the variety of wall compositions, we can’t provide you with appropriate wall fixings. Please identify your wall composition and contact your local hardware store to get the appropriate fixings. Wood Brick or Masonry Cavity Wall If fixing to wood Use an appropriate Special toggle wall make sure that it... - Page 6 Step 1 Unscrew the bolts attached to the base using a Phillips head screwdriver. Remove both bolts and the mounting bracket attached to the base. Keep the removed bolts and mounting bracket for the following assembly. ①...
- Page 7 Instructions below demonstrate how to attach the light to the wall using the provided wall plugs. However please do identify the type of your wall and choose the appropriate wall fixings. Step 2 Before attaching, check wall for hidden pipes and cables.
- Page 8 Step 3 Knock the plugs into the holes using a hammer. Place the mounting bracket against the wall and make sure it is aligned vertically again and fix the bracket in place with the screws B.
- Page 9 Step 4 Align the base with the mounting bracket and make sure the bolt holes on each part overlap. Insert the bolts removed in Step 1 into both holes and tighten them with a Phillips head screwdriver.
- Page 10 Step 5 Gently screw the correct bulb (not included) into the bulb holder.
- Page 11 Step 6 Attach the shade to the light cup and twist it until ② it is tight and secure. ②...
- Page 12 Step 7 Check all parts are secure. Direct the light where you want it as the light arm and head are adjustable. Enjoy! We hope your new Alya Wall Light lights up your life.