Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BROSA Tucana Wall Light
Summary of Contents for BROSA Tucana Wall Light
- Page 1 Tucana Wall Light A S S E M B LY G U I D E...
- Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 2 people. Assembling this product on It's always easier with a a soft surface protects its friend.
- Page 3 Safety MAX.40W 220-240V ~ 50Hz 1. For indoor use only. 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. 4.
- Page 4 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ② ① Shade x 1 Light Body x 1 Hardware Hardware...
-
Page 5: What You Need
Wall Fixings Because of the variety of wall compositions, we can’t provide you with appropriate wall fixings. Please identify your wall composition and contact your local hardware store to get the appropriate fixings. Wood Brick or Masonry Cavity Wall If fixing to wood Use an appropriate Special toggle wall make sure that it... - Page 6 Instructions below demonstrate how to attach the light to the wall using the provided wall plugs. However please do identify the type of your wall and choose the appropriate wall fixings. Step 1 Before attaching, check wall for hidden pipes and cables.
- Page 7 Step 2 Remove the light body and drill holes for the wall plugs using a drill. Knock the plugs into the holes using a hammer.
- Page 8 Step 3 Place the light body against the wall and make sure it is aligned vertically again and fix the body in place with the screws B.
- Page 9 Step 4 Unscrew the shade ring and remove it from the bulb holder.
- Page 10 Step 5 ② Fit the shade onto the bulb holder. Attach the shade ring to the bulb holder again and screw it until the shade is tight and secure. ②...
- Page 11 Step 6 Gently screw the correct bulb (not included) into the bulb holder.
- Page 12 Step 7 Check all parts are secure. Direct the light where you want it as the light arm angle and height is adjustable. Enjoy! We hope your new Tucana Wall Light lights up your life.
Need help?
Do you have a question about the Tucana Wall Light and is the answer not in the manual?
Questions and answers