Advertisement
Quick Links
Advertisement
Related Manuals for BROSA Capra Tripod Floor Lamp
Summary of Contents for BROSA Capra Tripod Floor Lamp
- Page 1 Capra Tripod Floor Lamp A S S E M B LY G U I D E...
- Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 2 people. Assembling this product on It's always easier with a a soft surface protects its friend.
- Page 3 Safety MAX.60W 220-240V ~ 50Hz 1. For indoor use only. 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. If the external flexible cable is damaged, it should be replaced immediately by a certified electrician. 4.
- Page 4 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ③ Shade x 1 ① ② Lamp Holder x 1 Leg x 3 Hardware...
- Page 5 Step 1 ② Unscrew the bolts attached to the top of the leg and remove them using the Allen key A. Keep them for the following assembly. Repeat this for the remaining legs. ②...
- Page 6 Step 2 Align one leg with the holes on the round plate of the lamp holder ①. Make sure the holes on each component overlap. Insert the bolts removed in Step 1 into the holes and tighten them with the Allen key A. ①...
- Page 7 Step 3 Repeat Step 2 for the remaining legs.
- Page 8 Step 4 Unscrew the shade ring and remove it from the bulb holder.
- Page 9 Step 5 ③ Attach the shade to the bulb holder. Attach the shade ring to the bulb holder again and screw it until the shade is tight and secure. ③...
- Page 10 Step 6 Gently screw the correct bulb (not included) into the bulb holder. Enjoy! We hope your new Capra Tripod Floor Lamp lights up your life!