Components Before you get started, check you have all of the pieces below. If anything’s missing, please visit www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it out right away. Top Socket x 1 Base x 1 Balance Handle Shade x 1 Pole x 4...
Page 3
Safety MAX 60W 220-240v ~ 50Hz 1. For indoor use only 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. Damaged power cords must be replaced by a professional. 4. Never use a bulb of a greater wattage than recommended. 5.
Page 4
Align the bottom pole with the base Step 1 rmly screw them together. Continue with the second pole (2). Align the horizontal pole’s middle hole to the second pole so that the screw holes are overlaping and x with the handle screw (7).
Page 5
Place the shade on top of the pole. Carefully adjust Step 2 the shade and tighten it in place with the top socket (8). Gently screw the correct bulb (not included) into the bulb socket. Adjust the angles of the poles using the handle screws.
Page 6
Check if all parts are secure. Step 3 Enjoy! We hope your new lamp lights up your life.