Emprex NSD-100 User Manual page 50

7-2-5-1
USB device
To be use as BT-HDD, the capacity of HDD must be more than
10GB and formatted into Linux-HD or FAT32-HD by NSD-100.
NSD-100 will recognize the formatted BT-HDD when the HDD
connects to USB I or USB II. Please note that Windows system cannot
recognize Linux-HD format directly without NSD-100.
(Please refer to 7-2-9-2 format hard disk for more detail)
7-2-5-2
USB Printer
You could connect USB printer to any USB port on NSD-100 as
printer's server. Please install the newest factory's driver. Do not use
the built-in similar driver.
50