Connect The Nsd-100 To Hub - Emprex NSD-100 User Manual

Step 13
The status will show "Link UP" that mean established connection
completed successfully.
(Please skip to chapter 7-2-1 for operate of BT
setting)

6-2 Connect the NSD-100 to HUB

Confirm it belong to the connection way is dialing (PPPoE,
Point-to-Point Protocol over Ethernet) or static IP that the
telecommunication company offers service of giving to you first.
Dialing mode (PPPoE)
Network & NetTool setting is the same as chapter 6-1。
21