Dmz Setting - Emprex NSD-100 User Manual

Web administration

6-4 DMZ Setting

We recommend user to start Router's DMZ function when the
BT-Download slows down. DMZ function could speed up BT-Download
and enable user to link NSD-100 homepage from outer network to
browse and set jobs.
Some Routers provide DMZ function. If your NSD-100 is located
behind the NAT router, you can forward LAN IP address specified by
DMZ to NSD-100. When this setting is done, all ports from WAN to
LAN will be forwarded to NSD-100.
User might set DMZ only under Router's LAN IP. After completing the
setting of NSD-100, NetTool will automatically connect to your NAT
Router. Here is an example regarding how to set DMZ with commercial
NAT router.
27