③
Network LED (Green)
Green
Off
Blinking Green
④
LED
Power
Green
Blinking Yellow
Red
Rear View
① Network port
Connect the port with cable (10/100 base-T) to your switching
HUB or NAT Router
② Power source port
Connect with power adaptor.
③ Reset key
Press and hold for 10 seconds to reset all configurations to factory
default settings.
Cable (10/100 base-T) connected
LAN disconnection
Data TX/RX
Power on and NSD-100 ready
System initializing
Power on but NSD-100 not ready or faulty
10