Emprex NSD-100 User Manual page 11

④ USB eject key I
Press and hold for 20~30 seconds and hear ''bee' twice and LED
"USB I" go off. Now you could safely remove the USB I device
from NSD-100.
⑤ USB I port
Connect with your USB device.
⑥ USB II port
Connect with your USB device.
⑦ USB eject key II
Press and hold for 20~30 seconds and hear ''bee' twice and LED
"USB II" goes off. Now you could safely remove the USB II device
from NSD-100.
Attention：
In order to use USB HDD with NSD-100, the capacity of external HDD
must be more than 10GB and formatted to Linux-HD or FAT32-HD by
NSD-100. NSD-100 will recognize the formatted BT-HDD when the
HDD connects to USB I or USB II. Please note that Windows operation
system is unable to recognize Linux-HD format directly without through
NSD-100. (Please refer 7-2-9-2 for formatting HDD)
11