PEUGEOT 3008 HYbrif4 Handbook page 31

How to start your vehicle
- Ensure that the gear lever is in
position N .
- Switch the ignition on by turning the
key to position 2 .
- Press fi rmly on the brake pedal, turn
the ignition key to position 3 to start
up the hybrid system, then release
the key.
- The instrument panel and the Ready
lamp come on. The power meter nee-
dle sweeps through its travel indicat-
ing that the hybrid system is active,
confi rmed by a message ; the dial in
the centre console is in AUTO mode
(default mode for starting).
- The hybrid system
whether it is necessary to start the
Diesel engine.
- With the brake still applied, move
the gear lever to position A to go
forwards or R (by lifting the lever
slightly) for reverse.
- Lift your foot off the brake pedal, you
can move off.
- The parking brake is released auto-
matically as you move off, if confi g-
ured to do so (otherwise, release the
parking brake manually).
determines
How to stop your vehicle and
the hybrid system
- Apply the brake until the vehicle
comes to a complete stop.
- Place the gear lever in position N .
- Turn the ignition key to position 1 ,
the parking brake is applied auto-
matically if confi gured to do so.
- Otherwise apply the parking brake
manually, the P warning lamp must
be on.
When stationary, switch off
the ignition and ensure that
the Ready lamp is off before
you leave the vehicle. Other-
wise the hybrid system will still be
active. See "Underbonnet precau-
tions/warnings".
When your vehicle starts in
electric mode, this means
that it makes no noise. Be
very careful of pedestrians
as they will not hear you
coming.
29