In the event of a breakdown
Third brake lamp
Type A, W16W – 16W
F Unscrew the two nuts.
F Push the pins.
F If necessary, disconnect the connector to
remove the lamp.
F Change the bulb.
Changing a fuse
The fuse boxes are located:
154
-
in the lower dashboard on the left-hand side
(behind the cover).
-
under the bonnet (near the battery).
If fitted on your vehicle, an
additional fuse box is provided
for towing, the towbar and the
connections for body and platform
cab conversions. It is located on
the right-hand side behind the
load stop partition.
The information given concerns only those
fuses which can be changed by the user using
the tweezers located behind the dashboard
storage compartment on the right-hand side.
For any other work, visit a PEUGEOT dealer or
a qualified workshop.
Professional repairers: for complete
information on the fuses and relays,
consult the wiring information and
diagrams available through the dealer
network.
Removing and fitting a fuse
Good
Failed
Before changing a fuse, the cause of the fault
must be found and rectified.
F Use the tweezers.
Always replace a faulty fuse with a fuse of
the same rating.
PEUGEOT accepts no responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories
not supplied or not recommended by
PEUGEOT and not installed in accordance
with the specifications, in particular when
the combined power consumption of all
of the additional equipment connected
exceeds 10 milliamperes.
Need help?
Do you have a question about the PARTNER TEPEE ELECTRIC and is the answer not in the manual?