PEUGEOT 3008 HYbrif4 Handbook page 176

Fitting a wheel
After changing a wheel
To store the punctured wheel
in the boot correctly, fi rst remove the
central cover.
Have the tightening of the bolts and
the pressure of the spare wheel
checked by a PEUGEOT dealer with-
out delay.
Have the punctured wheel repaired
and replace it on the vehicle as soon
as possible.
174
List of operations
Put the wheel in place on the hub.
Screw in the bolts by hand to the
stop.
Pre-tighten the security bolt (if your ve-
hicle has them) using the wheelbrace 1
fi tted with the security socket 5 .
Pre-tighten the other bolts using the
wheelbrace 1 only.
Lower the vehicle fully.
Fold the jack 2 and detach it.
Tighten the security bolt (if your vehicle
has them) using the wheelbrace 1 fi tted
with the security socket 5 .
Tighten the other bolts using the
wheelbrace 1 only.
Refi t the chromed bolt covers on
each of the bolts (according to
equipment).
Stow the tools.