Krups XP46 Manual page 20

English
R I N S I N G
IMPORTANT!
After descaling, rinse 2-3 times with clean water as
described in Section 4 "BEFORE FIRST USE".
Then rinse the steam nozzle by following the instructions
below:
n Fill the water tank with clean water. Then place a container under the
steam nozzle.
n Press the
turn the dial to the
n Let the water run through the nozzle until steam appears.
n Turn the dial back to the
n The machine is now descaled and ready to be used again.
22
button to turn the machine on, and then immediately
position, without stopping at the
position.
position.