Table of Contents
Advertisement
Quick Links
1
APPLICATION ................................................................................ 3
2
DESCRIPTION (FIG. A) .................................................................. 3
3
PACKAGE CONTENT LIST ............................................................ 3
4
SYMBOLS ....................................................................................... 3
5
GENERAL POWER TOOL SAFETY WARNINGS ......................... 4
5.1
Working area .......................................................................................................... 4
5.2
Electrical safety ..................................................................................................... 4
5.3
Personal safety ...................................................................................................... 4
5.4
Power tool use and care ........................................................................................ 5
5.5
Service .................................................................................................................... 5
6
MACHINES ...................................................................................... 5
7
RESIDUAL RISKS .......................................................................... 6
8
TRANSPORT AND START OF OPERATION ................................ 7
8.1
Transport and set-up ............................................................................................. 7
8.2
Assembly ............................................................................................................... 7
8.3
Assembly of clamping jig handle (J) (Fig. 2) ........................................................ 7
8.4
Release of the saw head ....................................................................................... 7
8.5
Key storage ............................................................................................................ 7
8.6
Electrical connection ............................................................................................. 7
8.7
Start of operation ................................................................................................... 7
9
OPERATING THE MACHINE ......................................................... 7
9.1
Correct working position: ..................................................................................... 7
9.2
Handling the work piece:....................................................................................... 7
9.3
Never saw with an unsupported hand .................................................................. 8
9.4
Operation: .............................................................................................................. 8
10
SET-UP AND ADJUSTMENTS ....................................................... 8
10.1
Cut-off wheel assembly (Fig. 6) ............................................................................ 8
10.2
Adjustment of cutting-depth stop ......................................................................... 9
11
TECHNICAL DATA ......................................................................... 9
Copyright © 2015 VARO
POWXQ5390
P a g e
| 1
EN
www.varo.com
Advertisement
Table of Contents
Related Manuals for VARO POWERplus XQ POWXQ5390
Summary of Contents for VARO POWERplus XQ POWXQ5390
-
Page 1: Table Of Contents
Never saw with an unsupported hand ..............8 Operation: ......................8 SET-UP AND ADJUSTMENTS ............8 10.1 Cut-off wheel assembly (Fig. 6) ................8 10.2 Adjustment of cutting-depth stop ................. 9 TECHNICAL DATA ................. 9 Copyright © 2015 VARO www.varo.com P a g e... - Page 2 CLEANING AND MAINTENANCE ..........10 13.1 Cleaning ....................... 10 13.2 Replacing the carbon brushes (Fig. 9) ............... 10 TROUBLESHOOTING ..............10 WARRANTY .................. 10 ENVIRONMENT ................11 DECLARATION OF CONFORMITY ..........12 Copyright © 2015 VARO www.varo.com P a g e...
-
Page 3: Application
If any parts are missing or damaged, please contact your dealer. 4 SYMBOLS In this manual and/or on the machine the following symbols are used: In accordance with essential Read manual before requirements of the European directive(s) Copyright © 2015 VARO www.varo.com P a g e... -
Page 4: General Power Tool Safety Warnings
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely. Copyright © 2015 VARO www.varo.com P a g e... -
Page 5: Power Tool Use And Care
Any other use of this device is to be considered improper and the manufacturer cannot be held liable for any resulting injury or loss. The user alone bears the risk. You may not clamp the movable protective guard in the open position. Copyright © 2015 VARO www.varo.com P a g e... -
Page 6: Residual Risks
Warning! This power tool generates an electro-magnetic field during operation. Under certain circumstances, this field may interfere with active or passive medical implants. In order to reduce the risk of serious or fatal injuries, we recommend that persons with Copyright © 2015 VARO www.varo.com P a g e... -
Page 7: Transport And Start Of Operation
Support long work pieces with roller blocks. Large, round or irregularly shaped work pieces must have additional clamping arrangements. Use G-clamps and blocks to firmly hold the work piece in place. Copyright © 2015 VARO www.varo.com P a g e... -
Page 8: Never Saw With An Unsupported Hand
Perform this process in reverse to install the new wheel. Do not over-tighten the screw. All guards must be in place and the wheel must be able to turn freely. Set the cutting-depth stop (see section 10.2). Copyright © 2015 VARO www.varo.com P a g e... -
Page 9: Adjustment Of Cutting-Depth Stop
Acoustic pressure level LpA 100 dB(A) Acoustic power level LwA 116 dB(A) ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case individual hearing protection must be worn. Copyright © 2015 VARO www.varo.com P a g e... - Page 10 ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation. Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions. Copyright © 2015 VARO www.varo.com P a g e | 10...
- Page 11 Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. Copyright © 2015 VARO www.varo.com P a g e | 11...
- Page 12 EN60745-2-10: 2010 EN55014-1: 2006 EN55014-2: 1997 EN61000-3-2: 2006 EN61000-3-11: 2000 Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy N.V. The undersigned acts on behalf of the company CEO, Philippe Vankerkhove Regulatory Affairs – Compliance Manager Date: 06/01/2014 Copyright ©...
Need help?
Do you have a question about the POWERplus XQ POWXQ5390 and is the answer not in the manual?
Questions and answers