General Notes To Installer - Carrier ClassiCOOL 53KDHT60N-518 Instruction Manual

1. GENERAL NOTES TO INSTALLER

Ducted split air conditioner has been carefully designed and manufactured under strict Quality
Control conditions.
Therefore you are completely responsible for proper installation completion and operation of the
air conditioner.
Carefully read the manual carefully before proceeding with the installation to ensure correct
installation. This manual describes installation instructions to help ensure trouble free operation
and extended life of the air conditioner.
Make sure all accessory parts are with the system before beginning installation.
You will need the following tools for installation:

1. Standard screwdriver
2. Phillips head screw driver
3. Electric drill, Hole core drill
4. Measure tape
5. Water level gauge
6. Pipe clamp
7. Pipe cutter
8. Spanner ( half union )
9. Reamer
Important

• During the system installation make first refrigerant piping connections and then electrical
connections.
• If the system is uninstalled first disconnect electrical cables and then refrigerant piping
connections.
After completion of installation, perform a run test and give the customer full

instructions on the correct operation of the air conditioner including:
• Turning the unit on and off.
• Functions of the wired control.
Leave the owner manual with the customer so that it can to be used during operation of the air
conditioner.
Leave the installation manual with the customer so that it can be used for any service and
maintenance operations.
Advise the customer to the tips of energy saving while operating the air conditioner as

mentioned in the owner's manual.
Warning

Disconnect the mains power supply switch before servicing the system or handling any internal parts
of the system.
10. Flaring tool set
11. Pipe bender
12. Hexagonal wrench ( 4mm )
13. Torque wrench
14. Vacuum pump matched with Air conditioner R410A
15. Gas leak detector for refrigerant R410A
16. Gauge manifold R410A
17. Thermometer
18. Electrical multimeter
• Removal and cleaning of the air filters.
• Re-installation of air filters after cleaning
1