EVGA Z590 DARK User Manual page 44

EVGA Z590 DARK (122-RL-E599)
EPS 8-pin 12V Power (PWR )
8P
, the 8-pin ATX 12V power connection(s), is used to provide
EPS PWR 8P
power to the CPU. Align the pins to the connector and press firmly until seated.
The secondary EPS, is optional for improved overclocking. Please remember to
make sure that the tab on the EPS socket is aligned with the release clip on the
cable. NOTE: If the tab and release clip are on opposite sides, yet the power
connector fits, then you are using a PCIe 8-pin cable, which WILL damage the
board if powered on. Please review installation instructions from your power
supply manufacturer to verify which connectors may be used for the CPU
power.
- 44 -