(11) Adjust the focus with the focus ring (Fig. 12).
* Adjust the focus after adjusting the angle
of view.
(12) Match the "I" mark on the lens with the
recessed portion of the camera holder
(Fig. 13).
* Be sure to match them, or the dome cover
may not be mounted in same lens
position.
(13) Mount the dome cover on the main body.
Match the mark on the dome cover with that
on the base, and turn the dome cover
clockwise (arrow direction) until it is clicked
(Fig. 14).
* If these marks are not matched, the dome
cover cannot be mounted.
Recessed part of the camera holder
Base
Mark
Dome cover
- 9 -
Focus ring
(Fig. 12)
Lens
(Fig. 13)
Main body
(Fig. 14)