LG HBP10H Installation Manual page 10

7.2.3.5 Server Connection(Wi-Fi setting)
(If you have an Ethernet connection and don't want to use Wifi , skip this part)
Enter the Network → Wi-Fi tab.
7.2.3.6 Check the Installation Status
Enter the Monitoring → Server Tab. Check the Status values are 'OK'. Whether the Ethernet
connection or Wi-Fi connection 'OK' depends on the server connection method. An example is
the case of Wi-Fi connection.)
27
1. Click the Scan AP button on the top right
of the Web UI.
2. The number of APs available is displayed
in a pop-up window.
3. Select the AP to access from the SSID
combo box, enter the password and click
the Connect button(Manual input is
possible).
4. If the connection to the AP is successful,
a pop-up window informs whether the
connection was successful as follows: