Ballast; Front Ballast - Kubota STV32 Operator's Manual

To avoid personal injury:
A Before jacking up the tractor, park it on a firm
and level ground and chock the front wheels.
A Fix the front axle to keep it from swinging.
A Select jacks that withstand the machine weight
and set them up as shown below.
(1) Jack points
TIRES, WHEELS AND BALLAST

BALLAST

To avoid personal injury:
A Additional ballast
transporting heavy implements. When the
implement is raised, drive slowly over rough
ground, regardless of how much ballast is
used.
A Do not fill the front wheels with liquid to
maintain steering control.
BFront Ballast
Add weights if needed for stability and improve traction.
Heavy pulling and heavy rear mounted implements tend
to lift front wheels.
Add enough ballast to maintain steering control and
prevent tip over. Remove weight when no longer needed.
C Front End Weights (option)
The front end weights can be attached to the bumper. See
your implement operator's manual for required number of
weights or consult your local KUBOTA Dealer to use.
(1) Front end weights
(2) Bumper
A Do not overload tires.
A Add no more weight than indicated in chart.
Maximum weight
47
will be needed for
25 kg x 7 Pieces