INNOSILICON T2T-25T BTC Table of Contents 1. OVERVIEW 2. ASSEMBLE THE MINER 2.1 Check the miner before power on 2.2 Connect the PSU 3. OPERATE THE MINER 3.1 Enter the miner console 3.2 Set up the pool 3.3 Check the hashrate of the miner 3.4 Network configuration...
T2T-25T BTC 1. OVERVIEW Part Number T2T-25T Algorithm Sha256 Size (L×W×H) 391mm(L)*141mm(W)*220mm(H) Net Weight 9.0KG Operating Temperature 0-40 ℃ (device junction temperature) Network Connection Ethernet Typical Hashrate and Power Dissipation of the Four Mode: You can set the mode follw the manual 3.5.1)
T2T-25T BTC 2. ASSEMBLE THE MINER 2.1 CHECK THE MINER BEFORE POWER ON · Check the warranty sticker is well or not, especially the hashboards PSU port side. If the warranty sticker is damaged when you received the miner, please contact our After-sales.
T2T-25T BTC 2.2 CONNECT THE PSU Note: The sequence of the PSU cable should be same with the follow picture Change the sequence of the PSU cable will void the warranty. Connect the miner and the router by the Ethernet cable, then the miner can start to run after power on the miner.
T2T-25T BTC 3. OPERATE THE MINER 3.1 ENTER THE MINER CONSOLE DHCP is the default IP mode of the miner, find the IP via the router or the IP scanner. Enter the IP of the miner on the browser and press the Enter button. Chrome is the suggested browser.
T2T-25T BTC 3.3 CHECK THE HASHRATE OF THE MINER After set up the pool, the miner will mine for you. 3.4 NETWORK CONFIGURATION INNOSILICON CONFIDENTIAL...
T2T-25T BTC 3.5 OTHER PAGES 3.5.1 CHANGE THE OPERATE MODE There are 4 modes can be choosed, please click the “Save” after you set the mode. 3.5.2 OVERVIEW INNOSILICON CONFIDENTIAL...
Need help?
Do you have a question about the T2T-25T BTC and is the answer not in the manual?
Questions and answers