GIGA-BYTE TECHNOLOGY Z590I VISION D User Manual
  1. Manuals
  2. Brands
  3. GIGA-BYTE TECHNOLOGY Manuals
  4. Motherboard
  5. Z590I VISION D
  6. User manual

GIGA-BYTE TECHNOLOGY Z590I VISION D User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Z590I VISION D
User's Manual
Rev. 1001
12ME-Z59VSI-1001R
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z590I VISION D and is the answer not in the manual?

Questions and answers

Related Manuals for GIGA-BYTE TECHNOLOGY Z590I VISION D

Summary of Contents for GIGA-BYTE TECHNOLOGY Z590I VISION D

  • Page 1 Z590I VISION D User's Manual Rev. 1001 12ME-Z59VSI-1001R For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
  • Page 2 Copyright © 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.

  • Page 3: Table Of Contents

    Table of Contents Z590I VISION D Motherboard Layout ................4 Z590I VISION D Motherboard Block Diagram ..............5 Chapter 1 Hardware Installation ..................6 Installation Precautions ..................6 Product Specifications ..................7 Installing the CPU ..................10 Installing the Memory ..................10 Installing an Expansion Card ................. 11 Back Panel Connectors ..................

  • Page 4: Z590I Vision D Motherboard Layout

    Z590I VISION D Motherboard Layout SYS_FAN2 ATX_12V_2X4 SYS_FAN3 CPU_FAN SYS_FAN1 LGA1200 TYPEC_1 Intel ® Thunderbolt ™ Controller TYPEC_2 QFLED E_AUDIO U32_G2_G1 M2_WIFI Intel Z590 (Note) (Note) ® D_LED U32_LAN ® Super I/O M_BIOS PCIEX16 Intel ® GbE LAN Temperature sensor...

  • Page 5: Z590I Vision D Motherboard Block Diagram

    Z590I VISION D Motherboard Block Diagram PCI Express 4.0 (Note) /3.0 Bus CPU CLK+/- (100~500 MHz) DDR4 3200 (Note) /3000 (Note) /2933 (Note) 2666/2400/2133 MHz M.2 Socket 3 LGA1200 CPU (M2A_CPU) Switch DisplayPort In Intel ® 2 USB Type-C ®...

  • Page 6: Chapter 1 Hardware Installation

    Chapter 1 Hardware Installation Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the chassis is suitable for the motherboard. •...

  • Page 7: 1-2 Product Specifications

    1-2 Product Specifications Š LGA1200 package: 11th Generation Intel ® Core ™ i9 processors/Intel ® Core ™ i7 processors/ Intel ® Core ™ i5 processors 10th Generation Intel ® Core ™ i9 processors/Intel ® Core ™ i7 processors/ Intel ® Core ™...
  • Page 8 Š 1 x PCI Express x16 slot, running at x16 Expansion Slots (The PCI Express x16 slot conforms to PCI Express 4.0 standard.) (Note) Storage Interface Š CPU: 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) (Note) Š...
  • Page 9 Š I/O Controller ® I/O Controller Chip Š Hardware Voltage detection Š Monitor Temperature detection Š Fan speed detection Š Fan fail warning Š Fan speed control * Whether the fan speed control function is supported will depend on the cooler you install.

  • Page 10: Installing The Cpu

    Installing the CPU Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage.

  • Page 11: Installing An Expansion Card

    Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode. Dual Channel mode cannot be enabled if only one memory module is installed. When enabling Dual Channel mode with two memory modules, it is recommended that memory of the same capacity, brand, speed, and chips be used.
  • Page 12 Q-Flash Plus Button (Note) This button allows you to update the BIOS when the power connector is connected but the system is not powered on. USB 3.2 Gen 1 Port The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0 specification.

  • Page 13: Internal Connectors

    Internal Connectors ATX_12V_2X4 F_PANEL SPEAKER CPU_FAN F_U32G1 SYS_FAN1/2/3 F_U32CG1 D_LED F_USB LED_C SATA3 0/2/3/4 CLR_CMOS M2A_CPU/M2P_SB (Note) (Note) The M2P_SB connector is on the back of the motherboard. Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •...
  • Page 14 1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed.
  • Page 15 5) D_LED (Addressable LED Strip Header) The header can be used to connect a standard 5050 addressable LED strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. Pin No. Definition V (5V) Data No Pin Connect your addressable LED strip to the header.
  • Page 16 7) SATA3 0/2/3/4 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel ® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array.
  • Page 17 9) F_PANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. Hard Drive PLED+ Power LED Activity LED PLED-...
  • Page 18 11) F_U32G1 (USB 3.2 Gen 1 Header) The header conforms to USB 3.2 Gen 1 and USB 2.0 specification and can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.2 Gen 1 ports, please contact the local dealer.
  • Page 19 14) CI (Chassis Intrusion Header) This motherboard provides a chassis detection feature that detects if the chassis cover has been removed. This function requires a chassis with chassis intrusion detection design. Pin No. Definition Signal 15) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults.

  • Page 20: Chapter 2 Bios Setup

    Chapter 2 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows the user to modify basic system configuration settings or to activate certain system features.

  • Page 21: The Main Menu

    The Main Menu System Time Setup Menus Configuration Hardware Items Information Configuration Items Current Settings Quick Access Bar allows you to quickly move to the General Help, Easy Mode, Smart Fan 6, or Q-Flash screen. Advanced Mode Function Keys <f><g> Move the selection bar to select a setup menu Move the selection bar to select an configuration item on a menu <h><i>...

  • Page 22: Smart Fan 6

    Smart Fan 6 Use the <F6> function key to quickly switch to this screen. This screen allows you to configure fan speed related settings for each fan header or monitor your system/CPU temperature. & TUNE ALL Allows you to apply the current settings to all fan headers. &...
  • Page 23 & FAN Mode Allows you to set the operating mode for the fan. Slope Adjusts the fan speed linearly based on the temperature. (Default) Stair Adjusts the fan speed stepwise based on the temperature. & FAN Fail Warning Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan connection when this occurs.

  • Page 24: Favorites (F11)

    Favorites (F11) Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where all of your favorite options are located. To add or remove a favorite option, go to its original page and press <Insert>...

  • Page 25: Tweaker

    Tweaker Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results.
  • Page 26 & AVX Offset (Note) When the processor runs AVX workloads, the CPU Clock Ratio will be reduced by the desired AVX offset value. For example, if the value is set to 3, the CPU Clock Ratio will be reduced by 3 when executing AVX instructions.
  • Page 27 /Energy Efficient Turbo & Race To Halt (RTH) (Note) (Note) Enables or disables the CPU power saving related settings. (Default: Auto) & Intel(R) Turbo Boost Technology (Note) Allows you to determine whether to enable the Intel ® CPU Turbo Boost technology. Auto lets the BIOS automatically configure this setting.
  • Page 28 & C6/C7 State Support Allows you to determine whether to let the CPU enter C6/C7 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. The C6/C7 state is a more enhanced power-saving state than C3. Auto lets the BIOS automatically configure this setting.
  • Page 29 & Memory Ref Clock Allows you to manually adjust the memory reference clock. (Default: Auto) & Memory Odd Ratio (100/133 or 200/266) (Note) Enabled allows Qclk to run in odd frequency. (Default: Auto) & Gear Mode (Note) Allows you to improve the maximum OC frequency potential. (Default: Auto) ƒ...
  • Page 30 & Vcore Volatge Mode/CPU Vcore/Dynamic Vcore(DVID)/BCLK Adaptive Voltage/CPU Graphics Voltage (VAXG)/DRAM Voltage (CH A/B)/CPU VCCIO/CPU System Agent Voltage/ VCC Substained/VCCPLL/VCCPLL OC/VCCVTT/ VCC STG/ VCC18 PCH/VCC1V8P These items allow you to adjust the CPU Vcore and memory voltages. ƒ Advanced Voltage Settings This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, and over- current protection level.

  • Page 31: Settings

    Settings ƒ Platform Power & Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled) & PEG ASPM Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is configurable only when Platform Power Management is set to Enabled.
  • Page 32 & RC6(Render Standby) Allows you to determine whether to let the onboard graphics enter standby mode to decrease power consumption. (Default: Enabled) & AC BACK Determines the state of the system after the return of power from an AC power loss. Memory The system returns to its last known awake state upon the return of the AC power.
  • Page 33 ƒ USB Configuration & Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) & XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) & USB Mass Storage Driver Support Enables or disables support for USB storage devices.
  • Page 34 & Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Disabled) & Port 0/2/3/4 Enables or disables each SATA port. (Default: Enabled) & SATA Port 0/2/3/4 DevSlp Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled) &...
  • Page 35 ƒ PC Health Status & Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Clears the record of previous chassis intrusion status and the Case Open field will Enabled show "No" at next boot. &...

  • Page 36: System Info

    System Info. This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. & Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator.) The Administrator level allows you to make changes to all BIOS settings;...

  • Page 37: Boot

    Boot & Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On) & CFG Lock Enables or disables the MSR 0xE2 function. (Default: Disabled) & Security Option Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup. After configuring this item, set the password(s) under the Administrator Password/User Password item.
  • Page 38 & VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only. EFI Driver Enables EFI option ROM. (Default) This item is configurable only when Fast Boot is set to Enabled or Ultra Fast. &...
  • Page 39 & Administrator Password Allows you to configure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. You will be requested to confirm the password. Type the password again and press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup.

  • Page 40: Save & Exit

    Save & Exit & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. &...

  • Page 41: Chapter 3 Appendix

    Chapter 3 Appendix 3-1 Configuring a RAID Set RAID Levels RAID 0 RAID 1 RAID 5 RAID 10 Minimum Number ≥2 ≥3 of Hard Drives Number of hard Size of the smallest (Number of hard (Number of hard Array Capacity drives * Size of the drive drives -1) * Size of drives/2) * Size of the...

  • Page 42: Installing Intel ® Optane ™ Memory And Storage Management

    3. Under Select Disks item, select the hard drives to be included in the RAID array. Press the <Space> key on the hard drives to be selected (selected hard drives are marked with "X"). Then set the stripe block size. The stripe block size can be set from 4 KB to 128 KB.
  • Page 43 A-2. Installation Guidelines 1. Go to Settings\IO Ports\SATA And RST Configuration and make sure RST Control PCIe Storage Devices is set to Manual. Then depending on which M.2 connector you install the Optane ™ memory in, set the corresponding PCIe Storage Dev on Port XX item to RST Controlled. 2.

  • Page 44: Drivers Installation

    Drivers Installation • Before installing the drivers, first install the operating system. • After installing the operating system, insert the motherboard driver disc into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe."...

  • Page 45: Regulatory Notices

    Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Product Name: Motherboard Trade Name: GIGABYTE Model Number: Z590I VISION D Responsible Party – U.S. Contact Information: G.B.T. Inc. Address: 17358 Railroad street, City Of Industry, CA91748 Tel.: 1-626-854-9338 Internet contact information: https://www.gigabyte.com FCC Compliance Statement: This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
  • Page 46 Under Industry Canada regulations, this radio transmitter may only operate European Union (EU) CE-Konformitätserklärung using an antenna of a type and maximum (or lesser) gain approved for Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: the transmitter by Industry Canada. To reduce potential radio interference EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/35/EU, to other users, the antenna type and its gain should be chosen so that Funkanlagen Richtlinie 2014/53/EU, RoHS-Richtlinie 2011/65/EU erfüllt...
  • Page 47 European Community Radio Equipment Directive Compliance Statement: This equipment complies with all the requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. This equipment is suitable for home and office use in all the European Community Member States and EFTA Member States. The low band 5.15 -5.35 GHz is for indoor use only.

  • Page 48: Contact Us

    Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw • GIGABYTE eSupport To submit a technical or non-technical (Sales/Marketing) question, please link to: https://esupport.gigabyte.com...

Table of Contents