Electric Wiring Diagram - Comfort Glow EQS5145 Manual

ELECTRIC WIRING DIAGRAM

Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in
accordance with national and local codes.
CIRCUIT DIAGRAM
S1
L
N
AC120V /
GND
60HZ
Disconnect power before servicing.
Any electrical re-wiring of this appliance must be done by a qualified electrician.
This wiring must be done in accordance with local codes and/or in Canada with
the current CSA C22.1 Canadian Electrical Code, and for US installations, the
National Electrical Code ANSI/NFPA No. 70.
If repairing or replacing any electrical component or wiring, the original
wire routing, color coding and securing locations must be followed.
BULB 1 BULB 2
40W 40W
FLAME EFFECT
MOTOR
DANGER
TEMPERATURE THERMAL
CONTROL CUTOFF
S2
10
THERMAL
FUSE
HEATER
ELEMENT
FAN
MOTOR