Table of Contents
Advertisement
Check the appliance is electrically safe and gas sound when you have finished.
Fig. 6.1
½" G cylindrical
(ISO 228-1) male
B
Fig. 6.2
½" G cylindrical
(ISO 228-1) female
A
C
½" G conical
(ISO 7-1) male
INSTALLATION
Connection to the Gas Supply
Gas connection (GB) Cat: II 2H3+
The fitting (Fig. 6.1) is made up of:
• Nut "C"
• Elbow fitting "B"
• Gasket "A"
n
n
Be careful when flexible pipes are used that they do
not come into contact with moving parts.
n
n
IMPORTANT! Do not use a naked flame to test for
leaks.
To maintain the thickness of 30 mm, the hob is fitted with a
channel to contain the connection pipe.
The gas inlet union can be turned in the direction required
after the elbow fitting "B" and nut "C" connection (Fig. 6.1)
has been slackened (Fig. 6.2) .
n
n
Never put the gas inlet in a downward position.
n
n
Never attempt to turn the elbow "B" without having
first slackened off the relative lock nut "C".
The gasket "A" (Fig. 6.1) guarantees the seal of the gas
connection. It is recommended that it be replaced whenever
it shows even the slightest deformation or imperfection.
16
Advertisement
Table of Contents
