Tools And Materials; Before You Begin; Prepare For Installation - Kohler K-11618 Installation Manual

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Pipe Adjustable
Wrench Wrench
Assorted Plumbers
Screwdrivers Putty

Before You Begin

Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the main water supply.
Do not remove the thread protectors until instructed to.
Before installation, unpack the components and inspect them for
damage. Return the components to the carton until you are ready
to install.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.

1. Prepare for Installation

Rough-In the Plumbing
Shut off the main water supply.
Install or relocate the supplies as necessary.
The water supply lines must be between 2" (5.1 cm) and 3-1/2"
(8.9 cm) from the finished wall.
113728-2-AC
Strap Hacksaw or Tubing Cutter
Wrench
Thread Hex
Sealant Wrench
2
Propane
Torch
Solder
Kohler Co.