Pro-Form Cadence LT User Manual page 17

THE SETTINGS MODE
1. Select the settings mode.
To select the settings mode,
press the gear button (P).
The first settings screen will
appear in the display. Note: If
you have selected a workout,
you may need to press the
Stop button repeatedly to
return to the home screen before selecting the set-
tings mode.
2. Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Stop button repeatedly to select the desired
settings screen.
3. Change settings as desired.
Software Version Number—The software version
number will appear in the display.
Display Test—This screen is intended to be used
by service technicians to identify whether the
display is working correctly.
Button Test—This screen is intended to be used
by service technicians to identify whether a certain
button is working correctly.
Total Time—The word TIME will appear in the
display. The display will show the total number of
hours that the treadmill has been used.
Total Distance—The letters MI or KM will appear
in the display. The display will show the total
distance (in miles or kilometers) that the walking
belt has moved.
P
Contrast Level—The currently selected contrast
level will appear in the display. Press the Speed
increase and decrease buttons to adjust the
contrast level.
Demo Mode—The currently selected demo mode
option will appear in the display. The console
features a demo mode, designed to be used if the
treadmill is displayed in a store. If the demo mode
is turned on, the console will not turn off and the
display will not be reset when you fi nish exercising.
Press the Speed increase button repeatedly to
select a demo mode option. To turn on the demo
mode, select DON. To turn off the demo mode,
select DOFF.
4. Exit the settings mode.
Press the gear button (P) to exit the settings mode.
17