English - MARELD PERFORMANCE ILLUMINE 800 RE Instruction Manual

ENGLISH

Before your first use, do please charge and discharge the batteries
Safety precautions
• Do not use the lamp in the immediate vicinity of inflammable materials or gases.
• Make sure that the illuminants are not covered during use.
• Only use the accessories included with the product for recharging your
rechargeable workshop lamp.
• Keep the lamp out of reach of unauthorised persons, especially children.
• Do not point the light directly in your own or any other person's or animal's eyes.
• Always check the mains cable before you use the charger. If the mains cable is
damaged, replace the charger.
• Do not dispose of used batteries with domestic waste, but leave them at an
appropriate collection point for disposal.
Lamp design and accessories
• 800Lumen Main + 200Lumen Torch
• Large reflector COB LED
• Stable suspension hooks
• 5V charging system for recharging the batteries
• Strong magnets at the swivel stand
• 1 Nylon hooks, 360°swivel
• 1 x charger base
Technical data
• 3.7V – rechargeable battery, Lithium 5000mAh
• LED : 10W High power COB LED
3W High power LED torch
• Luminance: Approx. 800LM Front Main
• Ambient temperature: -10° - +45°C
• Usage period:
Approx 3h lighting for switch to 100%
Approx 6h lighting for switch to 50%
Approx 15h lighting for switch to 10%
Approx 10h lighting for switch Torch
• Charging period: approx. 5h
• Protection class: III
• Charging input: 5V 1000mA
Recharging
• Completely charge the batteries before your first use the lamp.
• The lamp must be charged per three months to protect the battery lifetime.
Charging using an 5V DC USB charger
• Plug the power supply into USB main charger
• Plug the charger cable into the USB Micro socket .
ENGLISH
6
Approx. 200LM Top Torch