Safety Information - Elenco Electronics M-1000B Operator's Instruction Manual

1. Safety Information

To ensure that the meter is used safely, follow all of
the safety and operation instructions in this manual. If
the meter is not used as described in the manual, the
safety features of the meter might be impaired.
• Do not use the meter if the meter or the test leads look
damaged, or if you suspect that the meter is not operating
properly.
• Turn off the power to the circuit under test before cutting,
unsoldering, or breaking the circuit. Small amounts of current
can be dangerous.
• Use caution when working above 60VDC or 30VAC rms.
Such voltages pose a shock hazard.
• When using the test lead, keep your fingers behind the
guards on the test lead.
• Disconnect the live test lead before disconnecting the
common test lead.
• To avoid damage to the meter, do not exceed the input limits
shown below.
• This digital multimeter is designed for indoor use only.
FUNCTION
VDC
VAC
W /
mA, mA DC
10A DC
Refer to Section 4-2 on page 6 for complete specifications.
INPUT JACK
V/W & COM
V/W & COM
V/W & COM
mA & COM
10A & COM
-3-
INPUT LIMITS
1000VDC or 750Vrms AC
1000VDC or 750Vrms AC
220Vrms @ 15 sec.
200mA DC
10A DC