ASSEMBLE COMPONENTS TO THE PC BOARD
Care must be given to identifying the proper components and in good soldering habits. Refer to the soldering
tips section in this manual before you begin installing the components. Place a check mark in the box
each step is complete.
R1 - 620
5% 1/8W Res. Chip
(621)
C7 - 10 F Lytic Chip
(see Figure A)
U1 - XR-2206P IC Surface Mnt.
(see Figure B)
R9 - 100k 5% 1/8W Res. Chip
(104)
R8 - 10k
5% 1/8W Res. Chip
(103)
R5 - 3.9k
5% 1/8W Res. Chip
(392)
R6 - 200
5% 1/8W Res. Chip
(201)
R4 - 22k
5% 1/8W Res. Chip
(223)
Figure A
This
capacitor
polarized, be sure
that the (+) and (--)
sides are positioned
correctly.
is
Mount IC with pin 1 as shown on the PC board
illustration.
-5-
C5 - .01 F Capacitor Chip
(in the bag with lytic capacitors.)
C4 - .1 F Capacitor Chip
(in the bag with IC.)
C3 - 1 F Lytic Chip
(see Figure A)
C6 - 820pF Capacitor Chip
(in the bag with resistors.)
C2 - 10 F Lytic Chip
(see Figure A)
C8 - 10 F Lytic Chip
(see Figure A)
R7 - 8.2k
5% 1/8W Res. Chip
(822)
Figure B
after