Brave BRPFC112HEB Owner's Manual page 7

Adjust Stop Bolt to
Back of Tow Vehicle
Screw Pin
Shackle Clevis
Offset Tongue Position
C. INSTALLATION OF ATV TONGUE ASSEMBLY (if the lawn and garden hitching was purchased
refer to Section B. Installation of Lawn & Garden Hitching)
1. The tongue can be installed either on the left or right caster assembly depending on how the
wing mower will be towed. See figure 3. Secure the hitch pivot on the chosen caster
assembly with the 1/2" x 3-1/2" hex head bolt, lock washer, and nut provided.
2. Install the tongue into the hitch pivot and secure by placing a 5/16" wire lock pin on each side
of the hitch pivot.
BRPFC112HE, REV B
Telescoping Hitch - Install to Left
or to Right or in Both Directions
When Pulling Two Wing Mowers.
Figure 2: Installation of Tow Vehicle Hitch
Figure 3. Assembly of Hitch Pivot and ATV Tongue
Hitch Pivot – Attach
to either Left or Right
Caster Assy.
Direct Behind Tongue Position
7
Hitch Stop Angle
Tongue
REV 3/20