Brave BRPFC112HEB Owner's Manual page 5

READ THE COMPLETE ASSEMBLY INSTRUCTIONS BEFORE STARTING THE ASSEMBLY.
You should have:
- one mower deck assembly
- two carrier arm assemblies
- two cross brace tubes
- one tongue assembly (Lawn & Garden Hitching or ATV Tongue)
- one tow vehicle hitch assembly (only included on Lawn & Garden Hitching)
Optional hitches:
- one tongue extension
- one rear hitch assembly
A. ASSEMBLY OF MOWER WHEELS
1. Set the mower deck assembly on wood blocks so that it is suspended off the ground.
Note: The operator controls are on the front of the deck. (Left and right are determined by
looking in the direction of travel or by standing at the rear of the deck assembly looking
forward.)
Level
Adjustment
Bolt
Height Adjust
Screw
Pivot Arm
Tongue
Pivot Bolt
Figure 1. Assembly of Carrier Arm Assy., Tongue and Cross Brace Tubes
2. Install the two carrier arm assemblies in the pivot arms, which are located on the mower deck
assembly. Place the assembly so that the castered tires are on the front and the fixed tires are
on the back. See figure 1. Secure with 1/2" x 3-1/2" hex head bolts and lock nuts provided on
BRPFC112HE, REV B
ASSEMBLY INSTRUCTIONS
5
Cross Brace Tube
Carrier Arm
Assy.
Tongue – Attach to Either Left
or Right Carrier Arm Assy.
REV 3/20