Table of Contents
Advertisement
7) Place the Left Top Log D)02-46 on the pin
on Log B)02-56 and on top of the cutout
on Log A)02-65.
D)02-46
B)02-56
C)02-44
Pin
8) Place Front Right Log E)02-45 on the two
pins as shown.
9) Place the lava rock in the area between
the left and right logs, leaving a space in
the middle for log (F) 02-47.
10) Place the notch in Center Log F)02-47 over
Log E)02-45 and across the cutout on Log
A)02-65.
F)02-47
Notch
Regency FG39-1 FireGenie Freestanding Gas Stove
A)02-65
Cutout
E)02-45
A)02-65
E)02-45
Cutout
INSTALLATION
11) Position notch in Front Right Log G)02-48
on Log F)02-47 and push the bottom right
edge against the bracket on the burner
tray.
G)02-48
A)02-65
E)02-45
Notch
G)02-48
E)02-45
Side View
The bottom right edge of Log G)02-48 must
sit snugly against the bracket
12) Test fire to ensure proper light off (make
sure flame flows smoothly from one end
of burner to the other. If there is any flame
hesitation, check that area for any blockage
of the burner port.
B)02-56
E)02-45
C)02-44
Bracket
A)02-65
21
Advertisement
Table of Contents
