Panasonic SA-VK480EE Service Manual page 89

Step 7 Move the rear panel slightly backward as arrow shown.
Step 8 Lift up the AC Inlet P.C.B. together with the SMPS
P.C.B..
Step 9 Position DVD Mechanism unit (CR14D) according to the
diagram shown.
Step 10 Connect 50P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 11 Connect 11P FFC cable at the connector (CN2805) on
Main P.C.B..
Step 12 Connect 5P cable at the connector (CN1113) on USB
P.C.B..
Step 13 Position SMPS and AC Inlet P.C.B. acccording to the
diagram shown.
Step 14 Attach original cable with extension cable (REXX0680)
(11P cable from ZJ2701 to CN5050).
Step 15 Connect extension cable (REEX0930) (17P cable from
CN2808 to CN5050).
Step 16 Attach original cable with extension cable (REEX0683)
(8P cable from H5801 to CN5500).
Step 17 Service and repair AC Inlet P.C.B. and SMPS P.C.B.
respectively.
89