SA-AK350E / SA-AK350EB / SA-AK350EG
10.13. Disassembly of Deck mechanism unit
· Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
· Follow the (Step 1) - (Step 5) of Item 10.10
Step 1 Remove the 4 screws.
Step 2 Push the lever upward, and then open the cassette lid
ass'y.
10.14. Disassembly of Deck P.C.B.
· Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
· Follow the (Step 1) - (Step 5) of Item 10.10
Step 1 Remove 2 screws.
10.15. Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
Important notes: Ensure all the trays are in the "STOCK"
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in "STOCK" position,
please refer to (5.3 Setting the Tray In "STOCK" position
for CRS1 Service Manual order no. MD0509368C0)
Step 3 Tilt the cassette mechanism unit in the direction of
arrow (1), and then remove it in the direction of arrow (2).
Note: For disassembly of parts for deck mechanism unit,
refer to Section 10.16.
Step 2 Desolder wire at deck motor terminals.
Step 3 Remove Deck P.C.B.
34