Accessing The Web Server In The Machine - Sharp MX-M2630 Quick Start Manual

ACCESSING THE WEB SERVER IN THE
MACHINE
When the machine is connected to a network, the machine's built-in Web server can be accessed from a Web browser
on your computer.
OPENING THE WEB PAGES
1
CLOUD PORTAL
Toner Quantity Bk
Tap [Status] → [Network Status] from the menu.
2
3
Status User Control
Machine Identification
Total Count
Device Status
Network Status
Firmware Version
Power Reset
Data List
List for User
List for Administrator
4
10:15
Easy Easy
Easy
Copy Scan
Fax
Operation Enlarge Settings Total Count Brightness Job Status
Guide Display Mode Adjustment
Administrator Login
System
Settings
Status > Network Status
TCP/IP
TCP/IP: Enable
IPv4 Settings:
DHCP: Enable
IPv4 Address: xxx.xxx.xxx.xxx
Subnet Mask: xxx.xxx.xxx.xxx
Default Gateway: xxx.xxx.xxx.xxx
IPv6 Settings:
Top of Page
Tap the [Settings] key.
Scroll the screen down and check
"IPv4 Address" in IPv4 Settings of
TCP/IP.
Access the Web server in the machine
to open the Web pages.
Start a Web browser on a computer that is
connected to the same network as the machine
and enter the IP address of the machine.
Recommended Web browsers
Internet Explorer: 10 or higher (Windows
®
Firefox (Windows ), Safari (Mac OS
®
Chrome (Windows ):
Latest version or immediately previous major release
The Web page will appear.
The machine settings may require that user
authentication is performed in order to open the Web
page. Please ask the administrator of the machine for
the password that is required for user authentication.
®
)
®
),
5