Mounting In Portrait Position - AOC 42V7050 User Manual

4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely.
5. Unit without base weight= 19.0 kg. The equipment and its associated mounting means still remain secure during the test. For use only with UL Listed
Wall Mount Bracket with minimum weight/load: 19.0 kg.
1.5.1. VESA Grid
42V7050
Caution:
To prevent the display from falling:
• For wall or ceiling installation, we recommend installing the display with metal brackets which are commercially available. For detailed installation
instructions, refer to the guide received with the respective bracket.
• To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the
bracket manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the
diagram below.
1.6.

Mounting in Portrait Position

This display can be installed in portrait position.
1. Remove the table stand, if attached.
2. Rotate 90 degrees counter clockwise from the back side of the display. The terminals will be on the righe and top side of the user from the back of
the display.R
90
.NOTE: When installing the display on a wall, please consult a professional technician for proper installation. We accept no liability for installations not
performed by a professional technician.
400(H) x 400(V) mm
3
100 mm
90
42V7050
100 mm
100 mm
100 mm