Cleaning The Enamel Parts Inside Your Oven; Cleaning The Catalytic Liners Inside Your Oven; Removing And Replacing The Catalytic Liners - Kenwood KTG606S19 Installation Instructions Manual

Cleaning the Enamel Parts Inside Your Oven

• Do not use abrasive cleaners, cloths or pads to clean the enamel.
• Clean the enamel on the inside of the oven when it has cooled down, using household detergents or an
ammonia-based cleaner. You may use an 'off the shelf' oven cleaner, if you carefully follow the
manufacturers' instructions.
• The grill door can be removed to allow easier access to the inside of your oven. (See "Removing the Grill
Door" section)

Cleaning the Catalytic liners Inside Your Oven

Catalytic liners are installed within the oven cavity. These are the matte-finished, light-coloured panels on the
sides of the oven. They work by collecting any grease and oil residue during cooking. Catalytic liners are designed
to have a working life of about 300 hours.
The liner self-cleans by absorbing fats and oils and burning them to ash, which can then be easily removed from
the floor of the oven with a damp cloth. The lining must be porous to be effective. The liner may discolour with
age.
If a large amount of fat is spilled onto the liner, it may reduce its efficiency. To overcome this problem, set the
oven to maximum temperature for about 20 - 30 minutes. After the oven has cooled, wipe out the floor of the
oven.
Manual cleaning of the catalytic liners is not recommended. Damage will occur if a soap-impregnated steel wool
pad or any other abrasives are used. In addition, we do not recommend the use of aerosol cleaners on the liners.
The walls of a catalytic liner may become ineffective due to excess grease. The excess grease can be removed
with a soft cloth or sponge soaked in hot water and the cleaning cycle can be carried out as described above.

Removing and replacing the catalytic liners

The catalytic liners can be easily removed and replaced.
1. First remove the oven shelves
2. Remove the shelf runners by gently pulling out at the bottom
then lifting the runner up.
3. Remove the 4 screws and the liner. Replace with a new catalytic liners.
Kenwood Free Standing Twin Cavity Gas Cooker KTG606S19 Manual.indd 23 Kenwood Free Standing Twin Cavity Gas Cooker KTG606S19 Manual.indd 23
23
15/01/2021 15:59 15/01/2021 15:59