Set Up Rules And Alerts - Axis P8815-2 User Manual

AXIS People Counter
Configure the application

Set up rules and alerts

Send an email when the occupancy level exceeds the limit
This example explains how to set up a rule to send an email when the number of people inside the premises exceeds a limit. In
the example, the limit is 200.
Set the maximum occupancy limit
1. In the application, go to Settings > Occupancy data.
2. Select Enable stateful events.
3. Enter 200 in Higher threshold.
4. Click Submit.
Create a rule
1. In the camera's web interface, go to Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select Occupancy-High.
4. In the list of actions, under Notifications, select Send notification to email and then select a recipient from the list.
To create a new recipient, go to Recipients.
5. Type a subject and a message for the email.
6. Click Save.
Trigger an event for tailgating
This example explains how to trigger an event if more than one person pass the counter in the same direction within four seconds.
1. Go to Settings > Tailgating detection.
2. Drag the slider to adjust the shortest time allowed between counts:
- In: 4
- Out: 4
- In or out: 4
3. If needed, select Ignore counts made same second.
4. In the camera's web interface, go to Events.
5. Create a rule, and use the condition Application.
Trigger an event when someone passes in the wrong direction
This example explains how to trigger an event if someone passes the counter in the wrong direction.
1. Go to Settings > Direction detection.
2. In the camera's web interface, go to Events.
3. Create a rule, and use the condition Application.
17