Set Up A Schedule; Anonymize People - Axis P8815-2 User Manual

AXIS People Counter
Configure the application
1
Primary camera view
2
Secondary camera view
3 Reference object
10. Once the calibration is done, go to Live view in the primary camera to view all of the secondary cameras.
If you can't see the video stream from the secondary cameras in the primary camera, make sure that there are no other connections
to the secondary cameras running.

Set up a schedule

The application automatically disables the counting functionality when it gets dark. If you want to limit the counting further,
you can set up a schedule.
1. Go to Settings > Counting schedule.
2. To adjust start and stop times, move any of the sliders. To set individual schedules for each day of the week, select Per
day schedule and then move the corresponding sliders.
Turn off the application on a specific day of the week
Clear the checkbox next to the slider.

Anonymize people

You can configure the application so that people can no longer be identified from the camera. There are two levels of anonymization:
soft and hard.
Anonymize soft
This feature blocks all video streams and images from the camera. The live view still shows a blurred image which means you
can still see what is going on but you can't identify people.
1. Go to Settings > Advanced > Anonymize.
2. Click Anonymize soft.
3. To go back to normal mode, click Reset anonymization. Only users with an administrator account can do this.
Anonymize hard
Important
Anonymize hard removes all administrator users, locks the root password, and can only be reversed by doing a reset
to factory default on the camera.
1. Go to Settings > Advanced > Anonymize.
2. Click Anonymize hard.
13