Table of Contents
Advertisement
AXIS People Counter
Configure the application
Configure the application
Set the date and time
The date and time settings are important for your camera to keep the correct time for a longer period of time, and for the statistics to
be attributed to the correct time. You set the date and time in the camera's webpage.
1. In the camera's webpage, go to System > Date and time.
2. For more information about date and time settings, click
Create a user account
You can create user accounts with different privileges, so that unauthorized staff can view statistics but not change any settings
of the counter.
You create user accounts in the camera's webpage.
1. In the camera's webpage, go to System > Users.
2. For more information about user accounts, click
Set up the counter
To check if the application is calibrated for your camera, go to the Camera selector for AXIS People Counter tool.
1. In the application's webpage, go to Settings > General.
2. Make sure Counter status is enabled.
3. In Counter name, type the name of the camera or location.
This can be for example "Axis_main_entrance". All cameras need to have unique names.
4. Set Calibration mode:
-
If the application is calibrated for your camera, select Height setting. Type the mounting height in Visual height.
-
If the application is not calibrated, select Manual setting and click Setup. Place a person underneath the camera
and adjust the size of the yellow box so that it covers just one person.
5. If you need to zoom in, do one of the following:
-
Turn on Digital zoom and click Setup.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/37891#t10098768
.
.
10
Advertisement
Table of Contents
