Wall-Mounting - Panasonic VL-FAN2 Operating Instructions Manual

Wall-mounting

You can mount the repeater on the wall with the included wood screws and washers.
Mount the repeater on a wall (pillar) where the wood screws can be firmly fixed.
1
Drive the wood screws with washers into the wall (pillar).
2
Mount onto the wall, directing the wood screws into the slots on the repeater, and slide
the repeater down until it is secure.
L A bout 140 mm of space above the washers is required for raising the antenna.
Important:
L D o not mount the repeater on walls made of plasterboard, ALC (Autoclaved Lightweight
aerated Concrete panel), concrete block, or plywood of 18 mm or less in thickness.
Approx.
60 mm
Approx. 140 mm
2.5 – 3 mm
Wood screw
(included)
Washer
(included)
Installation
Wall
(Pillar)
15