Dt-800 Configuration - Promax DT-800 Manual

CONTROL MODULE. DT-800

4.7.4 DT-800 Configuration

The DT-800 is the control and power module, and therefore is the most important
module of the DTTV. The DT-800 controls the DTTV headend, which its compose by up
to seven modules. Two wire-bus connect the control module to the remaining modules
of the headend. The DT-800 allows the control and configuration of each module in a
separate way.
The first line at the bottom of the screen shows the modules linked to it. The
second line shows the total amount of modules that the control module has detected,
itself excluded.
4.7.4.1 Menu Tree
The diagram attached shows how to access the DT-800 menu setup and the
options available on it.
04-2012
Figure 14.- DT-800 configuration.
Page 21