Entering, Editing And Selecting Values - Promax DT-800 Manual

CONTROL MODULE. DT-800

4.7.3 Entering, Editing and Selecting values

- Selecting values
In case you want to SELECT a value among the available ones, use the
arrows LEFT
displays the wanted value, press ENTER
- Submenu
In case you access a SUBMENU, you could move through the options
available using the LEFT
option appears and then press ENTER
submenu, press UP
- Numeric Field Editing
In case you have to EDIT the numeric value, follow these steps:
1.- Press ENTER
2.- Use LEFT
3.- To change the value of a number press UP
4.- Once the value is edited, press ENTER
04-2012
Figure 13.-
or RIGHT to move among them. When the screen
and RIGHT
or ESCAPE
to enter the menu item.
or RIGHT to move among the numbers.
to confirm it and exit.
arrows, until the appropriate
. When you want to leave the
.
/ DOWN
to confirm the value.
.
Page 19