Table of Contents
Advertisement
CONTROL MODULE. DT-800
3. INSTALLATION
3.1 DT-900 Sub-rack
The DT-900 is a metallic casing (sub-rack), where the DTTV modules are
installed (Fig. 1).
Supplied accessories allow the subrack to be set up in two ways: Installing it in a
19 " rack cabinet (Fig. 2) or anchoring it on a wall.
The wall anchoring system allows, through a tilting system, accessing the rear of
the subrack, where the connectors are placed (Fig. 3).
One subrack can contain up to 8 modules. One of them must be the control
module DT-800.
The sub-rack DT-900 is supplied with an user's manual, which describes in detail
the steps to complete the assembly.
04-2012
Figure 1.- Subrack Assembly DT-900.
Page 5
Advertisement
Table of Contents
