Hiland F-1201-FPT Owner's Manual

Hiland F-1201-FPT Owner's Manual

Outdoor fire pit table
Hide thumbs Also See for F-1201-FPT:

Advertisement

Quick Links

Precaution!
The Powder Coating paint process has become the most
common widely used application in the outdoor furniture
category. Unfortunately powder coating is extremely
sensitive to Humidity and Moisture. A simple process to
protect your furniture, especially flat surfaces is to apply a
simple coat of good quality car wax prior to using. If this
process is done every few months it will protect your
furniture for years to come.
ANS Z83.26-2014 • CSA 2.37-2014 Gas-Fired Outdoor Infrared Patio Heaters
ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our customerservice
department at 1-888-775-1330, 7 a.m. - 4 p.m., PST, Monday – Friday. Or email the Warranty
Department at warranty@azpatioheaters.com.
Purchase Date
1
OWNER'S MANUAL
OUTDOOR FIRE PIT TABLE
MODEL # F-1201-FPT
DANGER
WARNING:
WARNING
For Outdoor Use Only
WH17/01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F-1201-FPT and is the answer not in the manual?

Questions and answers

Summary of Contents for Hiland F-1201-FPT

  • Page 1 OWNER’S MANUAL OUTDOOR FIRE PIT TABLE MODEL # F-1201-FPT DANGER WARNING: For Outdoor Use Only Precaution! The Powder Coating paint process has become the most WARNING common widely used application in the outdoor furniture category. Unfortunately powder coating is extremely sensitive to Humidity and Moisture.
  • Page 2 HOW TO REMOVE OXIDATION Rub the surface with automotive rubbing or polishing compound to abrade away oxidation. 1. Apply a coat of automotive paste wax to the surface. 2. Allow the wax to dry for a few minutes. 3. Remove residue and polish surface with a clean cloth. Oxidation can also be a problem metal painted surfaces, since the outermost layers of paint are constantly exposed to air and water.
  • Page 3: Replacement Parts List

    REPLACEMENT PARTS LIST PART DESCRIPTION QUANTITY Table Top Foot Side Panel 1 Side Panel 2 Side Panel 3 Side Panel 4 Door Burner Bracket Burner Removeable Burner Cover Stud(M8) Washer, Spring Washer & Nut 22/44 Bolt (6*35), Spring Washer & Nut / Washer Bolt (6*55), Spring Washer &...
  • Page 4: Hardware Contents

    HARDWARE CONTENTS Bolt (6*20mm) Washer Stud(M8) Washer Spring Washer&Nut Qty. 4 Qty. 12 Qty. 4 Wrench Glass Beads Qty. 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This appliance has been tested to and complies with the ANS Z21.97-2010, Outdoor DecorativeGas Appliances CGA CR 9 7-003 Outdoor Gas Fireplaces .
  • Page 5: Explosion - Fire Hazard

    SAFETY INFORMATION DANGER DANGER EXPLOSION - FIRE HAZARD CARBON MONOXIDE HAZARD Keep solid combustibles, such as building materials, This fire pit is a combustion appliance. All combustion paper or cardboard, a safe distance away from the appliances produce carbon monoxide (CO) during the fire pit as recommended by the instructions.
  • Page 6: Burn Hazard

    SAFETY INFORMATION WARNING WARNING California Proposition 65 This product is fueled by propane gas. Propane gas Combustion by-products produced when using is invisible, odorless, and flammable. An odorant is this product contain chemicals known to the State normally added to help detect leaks and can be of California to cause cancer, birth defects, and described as a rotten egg”smell.
  • Page 7: Operation Checklist

    OPERATION CHECKLIST Operation Checklist For a safe and pleasurable heating experience, perform this checklist before each use. Before Operating: 1. Become familiar with entire owner’s manual and understand all precautions noted. 2. All components are properly assembled, intact, and operable. 3.
  • Page 8 ASSEMBLY INSTRUCTIONS 1. Use Bolt, Washer, Spring Washer & Nut to connect side Panel C1,C2,C3,C4 and Door Frame in sequence( connect at same number). Bolt (6*35mm) X 10 Washer, C2 C2 Spring Washer & Nut 2. Put the unit upside down, connect and fix the foot onto it.S Bolt (6*35mm) X 10...
  • Page 9 ASSEMBLY INSTRUCTIONS 4. Fix the Burner Bracket (E) to the unit using Bolt (6*55), Washer, Spring Washer & Nut (J1). Place the Burner (F) on the Burener Bracket (E). Make sure the switch of the Burner is aligned with the Door. Hardware Used Bolt(6*55mm), Washer,...
  • Page 10 ASSEMBLY INSTRUCTIONS 5.Put the Glass Beads (Q) around the Burner (C). Put the Burner Cover (A) on the burner, when the Fire Pit is NOT in use or after use. Bolt(6*35mm), Washer, Spring Washer & Nut 6. Connect hose and regulator to cylinder. The propane gas and cylinder are sold separately.Use a standard 20 lb.
  • Page 11 ASSEMBLY INSTRUCTIONS Adented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gascylinder s of the U.S.
  • Page 12 OPERATION INSTRUCTIONS Leak Check WARNING Perform all leak tests outdoors. Extinguish all open flames. NEVER leak test when smoking. Do not use the fire pit until all connections have been leak tested and do not leak. Hose / Regulator Regulator / Cylinder Connection Connection 1.
  • Page 13 OPERATION INSTRUCTIONS DANGER WARNING • CARBON MONOXIDE HAZARD Very hot while in operation! Never lean over the fire pit while in use. • For outdoor use only. Never use inside house, or other Failure to comply with these instructions may result in unventilated or enclosed areas.
  • Page 14: For Your Safety

    OPERATION INSTRUCTIONS WARNING FOR YOUR SAFETY Be careful when attempting to manually ignite this fire pit. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When fire pit is ON: Burner will display tongues of blue and yellow flame.
  • Page 15 CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Fire pit does NOT reach the desired temperature. Fire pit glow is excessively uneven. Fire pit makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage fire pit and render it unsafe for use.
  • Page 16: Troubleshooting

    TROUBLESHOOTING Wait until the propane cylinder Propane cylinder is frosted over warms up and becomes unfrosted Burner won`t light Blockage in orifice Clear blockage Control knob is not in ON position Turn control knob to ON Turn cylinder valve OFF and fill the Gas pressure is low cylinder Outdoor temperature is less than 40ºF and...
  • Page 17: One-Year Limited Warranty

    ONE-YEAR LIMITED WARRANTY CUSTOMERS IN USA Do not return this product to the store where you purchased it. Please call 1-888-775-1330 for assistance. CUSTOMERS IN CANADA Only return this product to the store if it was purchased within 90 days. If you have problems after 90 days of purchase, please CALL 1-888-775-1330.

Table of Contents