Display Of Service Values; Error History; Mains Voltage; Intensity Of Flame - Siemens LME71 Series Basic Documentation


Note
Can be deleted for service (see chapter Parameter list)!
To the next parameter
End of service level – End –
To the start of the service
level
ESC
Smart Infrastructure
13.7.2

Display of service values

13.7.2.1.

Error history

See Parameter with index, with or without direct display / example of parameter 701
Error history.
Refer to chapter Error code list!
13.7.2.2.

Mains voltage

P
V
h min s
13.7.2.3.

Intensity of flame

P
V h min s
13.7.2.4.

End of service level

P
V h min s
P
V h min s
P
V h min s
Basic Documentation LME7...
13 Operation via AZL2
Parameter 951: appears blinking.
Mains voltage is displayed on the right.
% Example: 951: 120
Display shows parameter 954: blinking.
On the right, the intensity of the flame is displayed
in 0...100 .
%
%
Example: 954:
When this display appears, you have reached the
end of the service level.
Display shows – End – blinking.
%
ESC
Press
Display shows OPErAtE.
%
When this display appears, you are back on the
normal display and you can change to the next
level mode.
%
Back to the previous
parameter
0
Back to the previous
parameter
To the end of the service
level
to return to standby mode.
CC1P7105en
76/116
24.07.2020