Alternately with
or with
or with
Note
During the restore process, all settings and parameters are written from the PME7 to the
internal memory of the LME7. As part of this process, it is possible that previous program
sequences, parameters, and settings in the internal memory of the LME7 will be overwritten.
nfo
>1 s
Note:
For meaning of the error and diagnostic codes, see chapter Error code list...
Smart Infrastructure
15.8.1 Errors during the restore process
15.8.2
Reset
Basic Documentation LME7...
15 Operation via internal LED
Display shows alternately rSt and Er1, Er2 or Er3.
For meaning of a possible cause, see chapter Error code list
with operation via internal LED.
nfo
Press
(for 1 to 3 seconds) and OFF will appear.
When the button is released, the LME7 is reset.
112/116
CC1P7105en
24.07.2020